ARUM Sintec K
-
ARUM Sintec K 98 x 10 mm
151,20 €Arum Sintec K
Soft as wax milling of Co/Cr – wet or dry! The isostatic high pressure manufacturing process allows bridges with up to 14 units and even implant bar restorations. Non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/Cr alloys. The small shrinkage allows you to place up to 40 units in a blank. Minimal wear of burs.
The Facts
+ Optimal homogeneity due to isostatic high pressure manufacturing process allows bar restorations, bridges with up to 14 pontics and delicate elaboration in familiar, dental technical execution
+ Non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/ Cr alloys
+ High yield due to big surface and small shrinkage – up to 40 units in a blank
+ Only 8,5% shrinkage due to unique, isostatic high pressure manufacturing process with optimal homogeneity – no distortion during sintering
+ Familiar blank height in 10mm/ 12mm/ 14mm/ 16mm/ 18mm und 20mm
+ Minimal wear of burs due to soft, but milling resistant material structure – therefore often called soft metal
+ Optional wet- or dry processing possible using a wax strategyNote: You are using the system Amann Girrbach* with 98 mm Ø roundblanks? We can offer you our roundblanks with the adequate shrinkage for Amann Girrbach* systems. Please contact us via Email: info@arumdentalshop.com
------------------------------------------------------------------------------------------------------------------------
Blanks from 12 mm with Step unit
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 10 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 12 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 14 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 16 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 18 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 20 mm 1
------------------------------------------------------------------------------------------------------------------------The terms marked with * are registered trademarks and/or brand names of the respective companies.
-
ARUM Sintec K 98 x 12 mm (with step)
171,72 €Arum Sintec K
Soft as wax milling of Co/Cr – wet or dry! The isostatic high pressure manufacturing process allows bridges with up to 14 units and even implant bar restorations. Non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/Cr alloys. The small shrinkage allows you to place up to 40 units in a blank. Minimal wear of burs.
The Facts
+ Optimal homogeneity due to isostatic high pressure manufacturing process allows bar restorations, bridges with up to 14 pontics and delicate elaboration in familiar, dental technical execution
+ Non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/ Cr alloys
+ High yield due to big surface and small shrinkage – up to 40 units in a blank
+ Only 8,5% shrinkage due to unique, isostatic high pressure manufacturing process with optimal homogeneity – no distortion during sintering
+ Familiar blank height in 10mm/ 12mm/ 14mm/ 16mm/ 18mm und 20mm
+ Minimal wear of burs due to soft, but milling resistant material structure – therefore often called soft metal
+ Optional wet- or dry processing possible using a wax strategyNote: You are using the system Amann Girrbach* with 98 mm Ø roundblanks? We can offer you our roundblanks with the adequate shrinkage for Amann Girrbach* systems. Please contact us via Email: info@arumdentalshop.com
------------------------------------------------------------------------------------------------------------------------
Blanks from 12 mm with Step unit
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 10 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 12 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 14 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 16 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 18 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 20 mm 1
------------------------------------------------------------------------------------------------------------------------The terms marked with * are registered trademarks and/or brand names of the respective companies.
-
ARUM Sintec K 98 x 14 mm (with step)
190,08 €Arum Sintec K
Soft as wax milling of Co/Cr – wet or dry! The isostatic high pressure manufacturing process allows bridges with up to 14 units and even implant bar restorations. Non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/Cr alloys. The small shrinkage allows you to place up to 40 units in a blank. Minimal wear of burs.
The Facts
+ Optimal homogeneity due to isostatic high pressure manufacturing process allows bar restorations, bridges with up to 14 pontics and delicate elaboration in familiar, dental technical execution
+ Non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/ Cr alloys
+ High yield due to big surface and small shrinkage – up to 40 units in a blank
+ Only 8,5% shrinkage due to unique, isostatic high pressure manufacturing process with optimal homogeneity – no distortion during sintering
+ Familiar blank height in 10mm/ 12mm/ 14mm/ 16mm/ 18mm und 20mm
+ Minimal wear of burs due to soft, but milling resistant material structure – therefore often called soft metal
+ Optional wet- or dry processing possible using a wax strategyNote: You are using the system Amann Girrbach* with 98 mm Ø roundblanks? We can offer you our roundblanks with the adequate shrinkage for Amann Girrbach* systems. Please contact us via Email: info@arumdentalshop.com
------------------------------------------------------------------------------------------------------------------------
Blanks from 12 mm with Step unit
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 10 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 12 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 14 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 16 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 18 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 20 mm 1
------------------------------------------------------------------------------------------------------------------------The terms marked with * are registered trademarks and/or brand names of the respective companies.
-
ARUM Sintec K 98 x 16 mm (with step)
210,60 €Arum Sintec K
Soft as wax milling of Co/Cr – wet or dry! The isostatic high pressure manufacturing process allows bridges with up to 14 units and even implant bar restorations. Non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/Cr alloys. The small shrinkage allows you to place up to 40 units in a blank. Minimal wear of burs.
The Facts
+ Optimal homogeneity due to isostatic high pressure manufacturing process allows bar restorations, bridges with up to 14 pontics and delicate elaboration in familiar, dental technical execution
+ Non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/ Cr alloys
+ High yield due to big surface and small shrinkage – up to 40 units in a blank
+ Only 8,5% shrinkage due to unique, isostatic high pressure manufacturing process with optimal homogeneity – no distortion during sintering
+ Familiar blank height in 10mm/ 12mm/ 14mm/ 16mm/ 18mm und 20mm
+ Minimal wear of burs due to soft, but milling resistant material structure – therefore often called soft metal
+ Optional wet- or dry processing possible using a wax strategyNote: You are using the system Amann Girrbach* with 98 mm Ø roundblanks? We can offer you our roundblanks with the adequate shrinkage for Amann Girrbach* systems. Please contact us via Email: info@arumdentalshop.com
------------------------------------------------------------------------------------------------------------------------
Blanks from 12 mm with Step unit
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 10 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 12 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 14 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 16 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 18 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 20 mm 1
------------------------------------------------------------------------------------------------------------------------The terms marked with * are registered trademarks and/or brand names of the respective companies.
-
ARUM Sintec K 98 x 18 mm (with step)
233,28 €Arum Sintec K
Soft as wax milling of Co/Cr – wet or dry! The isostatic high pressure manufacturing process allows bridges with up to 14 units and even implant bar restorations. Non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/Cr alloys. The small shrinkage allows you to place up to 40 units in a blank. Minimal wear of burs.
The Facts
+ Optimal homogeneity due to isostatic high pressure manufacturing process allows bar restorations, bridges with up to 14 pontics and delicate elaboration in familiar, dental technical execution
+ Non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/ Cr alloys
+ High yield due to big surface and small shrinkage – up to 40 units in a blank
+ Only 8,5% shrinkage due to unique, isostatic high pressure manufacturing process with optimal homogeneity – no distortion during sintering
+ Familiar blank height in 10mm/ 12mm/ 14mm/ 16mm/ 18mm und 20mm
+ Minimal wear of burs due to soft, but milling resistant material structure – therefore often called soft metal
+ Optional wet- or dry processing possible using a wax strategyNote: You are using the system Amann Girrbach* with 98 mm Ø roundblanks? We can offer you our roundblanks with the adequate shrinkage for Amann Girrbach* systems. Please contact us via Email: info@arumdentalshop.com
------------------------------------------------------------------------------------------------------------------------
Blanks from 12 mm with Step unit
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 10 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 12 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 14 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 16 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 18 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 20 mm 1
------------------------------------------------------------------------------------------------------------------------The terms marked with * are registered trademarks and/or brand names of the respective companies.
-
ARUM Sintec K 98 x 20 mm (with step)
269,40 €Arum Sintec K
Soft as wax milling of Co/Cr – wet or dry! The isostatic high pressure manufacturing process allows bridges with up to 14 units and even implant bar restorations. Non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/Cr alloys. The small shrinkage allows you to place up to 40 units in a blank. Minimal wear of burs.
The Facts
+ Optimal homogeneity due to isostatic high pressure manufacturing process allows bar restorations, bridges with up to 14 pontics and delicate elaboration in familiar, dental technical execution
+ Non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/ Cr alloys
+ High yield due to big surface and small shrinkage – up to 40 units in a blank
+ Only 8,5% shrinkage due to unique, isostatic high pressure manufacturing process with optimal homogeneity – no distortion during sintering
+ Familiar blank height in 10mm/ 12mm/ 14mm/ 16mm/ 18mm und 20mm
+ Minimal wear of burs due to soft, but milling resistant material structure – therefore often called soft metal
+ Optional wet- or dry processing possible using a wax strategyNote: You are using the system Amann Girrbach* with 98 mm Ø roundblanks? We can offer you our roundblanks with the adequate shrinkage for Amann Girrbach* systems. Please contact us via Email: info@arumdentalshop.com
------------------------------------------------------------------------------------------------------------------------
Blanks from 12 mm with Step unit
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 10 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 12 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 14 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 16 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 18 mm 1
------------------------------------------------------------------------------------------------------------------------
Arum Sintec K CoCr-Blank 98 Ø x 20 mm 1
------------------------------------------------------------------------------------------------------------------------The terms marked with * are registered trademarks and/or brand names of the respective companies.